2 Installation and commissioning
2.7.2 Installing the motor cooling fan (option)
Continued
5
6
Connecting the fan cabling
1
2
Continues on next page
88
Action
Fit the fan unit sheets around the motor and fasten
them to each other by tightening the six screws.
Lift the box so that it does not rest directly on the
robot and secure the box against the motor with
the two tightening screws.
Tighten them properly so that the box is firmly
attached to the motor.
Action
Remove the rear cover plate.
Fit the customer connection plate.
© Copyright 2017 - 2020 ABB. All rights reserved.
Note
xx1800000158
xx1800000160
Note
xx1800000161
xx1800000162
Product manual - IRB 6700Inv
3HAC058254-001 Revision: L