Attaching lifting accessories
Attaching the lifting accessories to the upper arm
Use this procedure to attach the lifting accessories to the upper arm.
1
2
3
4
5
Product manual - IRB 6700Inv
3HAC058254-001 Revision: L
Action
CAUTION
The weight of the complete upper arm (in-
cluding the wrist) is 465 kg
All lifting accessories used must be sized
accordingly.
Fit a lifting eye to the wrist.
Fit a lifting eye in the arm house, with a
fender washer underneath.
xx1400002196
Attach a lifting sling to an overhead crane
(or similar) and then to the lifting eye in the
arm house.
Attach a lifting sling to an overhead crane
(or similar) and then to the lifting eye in the
wrist.
Note
Lifting slings are used instead of lifting
chains to not damage the balancing device
surface.
© Copyright 2017 - 2020 ABB. All rights reserved.
4.3.3 Attaching lifting accessories to the upper arm
Note
Lifting eye, M12: 3HAC16131-1
xx1200001133
Lifting eye, M12: 3HAC16131-1
Fender washer: Outer diameter: minimum
26 mm, maximum 30 mm, hole diameter:
13 mm, thickness: 3 mm.
xx1200001134
Roundsling, 2 m: Lifting capacity: 2,000 kg.
(2 pcs)
xx1700000693
4 Repair
Continued
Continues on next page
205