ABB IRB 6700Inv Series Product Manual page 108

3 Maintenance
3.3.4 Inspecting the oil level in axis-3 gearbox
Continued
Inspecting the oil level in axis-3 gearbox
Use this procedure to inspect the oil level in the gearbox.
1
2
3
4
5
6
7
Continues on next page
108
Action
Jog the robot into position:
• Axis 1:
• Axis 2: 0°
• Axis 3: 180° (horizontal)
• Axis 4:
• Axis 5:
• Axis 6: no significance
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot
working area.
Make sure that the oil temperature is +25°C
± 10°C.
WARNING
Handling gearbox oil involves several
safety risks, see Gearbox lubricants (oil or
grease) on page 33.
Open the oil plug.
Check the oil level.
Required oil level is: 0 - 20 mm below the
oil plug hole.
Add or drain oil, if required.
© Copyright 2017 - 2020 ABB. All rights reserved.
Note
xx1600002046
Type of oil and total amount is detailed in
Technical reference manual - Lubrication
in gearboxes.
Further information about how to drain or
fill with oil is found in section
axis-3 gearbox on page 157.
Product manual - IRB 6700Inv
3HAC058254-001 Revision: L
Changing oil,