11 CONTROL CODE BIT
MANAGEMENT
Instruction Summary
•
"Compare Data Register" on page 11-2
•
"Compare Pointer" on page 11-6
•
"Compare Accumulator" on page 11-9
•
"Move CC" on page 11-12
•
"Negate CC" on page 11-15
Instruction Overview
This chapter discusses the instructions that affect the Control Code (
bit in the
ASTAT
set the
bit based on a comparison of values from two registers, pointers,
CC
or accumulators. In addition, these instructions can move the status of the
bit to and from a data register or arithmetic status bit, or they can
CC
negate the status of the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
register. Users can take advantage of these instructions to
bit.
CC
)
CC
11-1