Analog Devices ADSP-BF53x Blackfin Reference page 433

Instruction Length
In the syntax, comment (a) identifies 16-bit instruction length.
Functional Description
The Compare Pointer instruction sets the Control Code (
a comparison of two values. The input operands are P-registers.
The compare operations are nondestructive on the input operands and
affect only the
subsequent conditional branching.
The various forms of the Compare Pointer instruction perform 32-bit
signed compare operations on the input operands or an unsigned compare
operation, if the
tions perform a subtraction and discard the result of the subtraction
without affecting user registers. The compare operation that you specify
determines the value of the
Flags Affected
• is set if the test condition is true; cleared if false.
CC
• All other flags are unaffected.
The ADSP-BF535 processor has fewer
operate differently than subsequent Blackfin family products. For
more information on the ADSP-BF535 status flags, see
on page
Required Mode
User & Supervisor
Parallel Issue
This instruction cannot be issued in parallel with other instructions.
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
bit and the flags. The value of the
CC
optional mode is appended. The compare opera-
(IU)
bit.
CC
A-3.
Control Code Bit Management
CC
flags and some flags
ASTAT
) bit based on
CC
bit determines all
Table A-1
11-7