Ip Dhcp-Capture - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip dhcp-capture

Syntax
Release Information
Description
Options
Mode
756
ip dhcp-capture { all | receive | transmit } [ priority { low | high } ]
no ip dhcp-capture { all | receive | transmit }
Command introduced in JunosE Release 7.3.0.
Configures the E Series router to capture and log DHCP packet information for an interface.
By default, DHCP packet information is not captured. The no version restores the default
behavior.
all—Captures received and transmitted packets
receive—Captures received packets
transmit—Captures transmitted packets
low—Captured packets arrive with low priority; the default priority
high—Captured packets arrive with high priority
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.