Monitoring Dhcp Packet Capture Settings; Table 118: Show Dhcp Vendor-Option Output Fields; Table 119: Show Ip Dhcp-Capture Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

JunosE 11.3.x Broadband Access Configuration Guide
Meaning
Related
Documentation

Monitoring DHCP Packet Capture Settings

Purpose
Action
Meaning
558
configured yet therefore all packets for this application
will be dropped
Total 4 entries.
Vendor-option
-------------------------------- ----------------------------------------
Juniper
Table 118 on page 558 lists the show dhcp vendor-option command output fields.

Table 118: show dhcp vendor-option Output Fields

Field Name
Vendor-option
Action
rx
no-match
show dhcp vendor-option
Display the configuration for per-interface DHCP packet logging.
To display configuration information about the DHCP packet capture feature:
host1#show ip dhcp-capture
Dhcp Capture Configuration
--------------------------
Router Interface Type
------- --------- -----
default ip3/1 Rx/Tx
default ip5/1 Rx
Table 119 on page 558 lists the show ip dhcp-capture command output fields.

Table 119: show ip dhcp-capture Output Fields

Field Name Field Description
Router Router name
Interface Interface whose DHCP packets are logged
relay to 10.10.1.1 (rx: 0)
Field Description
Option 60 string; an asterisk (*) indicates that the string exactly
matches a configured option 60 string, default indicates the action
to take when the string does not match a configured option 60
string
Action to take for the indicated string match; drop, forward to
local-server, proxy client server, or all configured DHCP vendor
option servers; or relay to the specified DHCP server
Received packets that match a vendor-option string
Received packets that do not match a vendor-option string;
no-match statistics appear only for default entries
Priority
--------
low/low
high
Action
Copyright © 2010, Juniper Networks, Inc.