Table 118: Show Dhcp Vendor-Option Output Fields; Table 119: Show Ip Dhcp-Capture Output Fields; Monitoring Dhcp Packet Capture Settings - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

Table 118: show dhcp vendor-option Output Fields

Related Topics

Monitoring DHCP Packet Capture Settings

Display the configuration for per-interface DHCP packet logging.
Purpose
To display configuration information about the DHCP packet capture feature:
Action
host1#show ip dhcp-capture
Router
-------
default
default
Table 119 on page 565 lists the show ip dhcp-capture command output fields.
Meaning

Table 119: show ip dhcp-capture Output Fields

Field Name Field Description
Vendor-option Option 60 string; an asterisk (*) indicates that the string exactly
matches a configured option 60 string, default indicates the action
to take when the string does not match a configured option 60
string
Action Action to take for the indicated string match; drop, forward to
local-server, proxy client server, or all configured DHCP vendor
option servers; or relay to the specified DHCP server
rx Received packets that match a vendor-option string
no-match Received packets that do not match a vendor-option string;
no-match statistics appear only for default entries
show dhcp vendor-option
Dhcp Capture Configuration
--------------------------
Interface Type
--------- -----
ip3/1 Rx/Tx
ip5/1 Rx
Field Name Field Description
Router Router name
Interface Interface whose DHCP packets are logged
Type Packet type to be logged, Rx (received), Tx (transmitted), or Rx/Tx (all)
Priority Priority assigned to logged packets, low or high
Chapter 22: Monitoring and Troubleshooting DHCP
Priority
--------
low/low
high
Monitoring DHCP Packet Capture Settings
565