JunosE 11.2.x Broadband Access Configuration Guide
Meaning
Related Topics
Monitoring DHCP Relay Configuration Information
Purpose
Action
550
Router
Interface
Type
-------
---------
-----
default
ip3/1
Rx/Tx
default
ip5/1
Rx
Table 119 on page 550 lists the show ip dhcp-capture command output fields.
Table 119: show ip dhcp-capture Output Fields
Field Name
Field Description
Router
Router name
Interface
Interface whose DHCP packets are logged
Type
Packet type to be logged, Rx (received), Tx (transmitted), or Rx/Tx (all)
Priority
Priority assigned to logged packets, low or high
show ip dhcp-capture
Display DHCP relay configuration information and the IP addresses of the configured
DHCP servers.
To display information about the DHCP relay configuration and the IP address of the
DHCP servers.
host1#show dhcp relay
DHCP Relay Configuration
------------------------
Mode: Proxy
Restore Client Timeout: 72
Send First Offer: off
Inhibit Access Route Creation: off
Assign Giaddr to Source IP: off
Layer 2 Unicast Replies: off
Giaddr Selects Interface: off
Broadcast Flag Replies: on
Maximum client pps : 4096
Relay Agent Information Option (82):
Override Giaddr: off
Override Option: off
Trust All Clients: off
Preserve Option From Trusted Clients: off
Circuit-ID Sub-option (1): on
select - hostname
select - exclude-subinterface-id
Remote-ID Sub-option (2): on
Vendor-Specific Sub-option (9): on
select - layer2-circuit-id
select - user-packet-class
DHCP Server Addresses
---------------------
30.3.7.1
Priority
--------
low/low
high
Copyright © 2010, Juniper Networks, Inc.