Dhcp Test Results; Http Test Results; Pop3 Test Results; Smtp Test Results - Juniper TEPM CONTROLLER - RELEASE NOTES 17-12-10 Release Note

properly persisted on the TePM Agent and hence is lost when the TePM Agent is
restarted.

DHCP Test Results

•
The TePM Controller does not currently decode/present all of the DHCP options returned
in the results of a DHCP test.

HTTP Test Results

•
HTTP tests initiated from the Controller may incorrectly report test successful test
completion when the URL requested cannot be located. The TePM Controller classifies
an HTTP test as successful as long as a TCP connection is established to the host
specified in the URL and a 3XX, 4XX or 5XX error is returned by the HTTP server.

POP3 Test Results

•
POP3 tests initiated from the Controller may incorrectly report successful test completion
when incorrect authentication credentials (username or password) are supplied. The
TePM Controller classifies a POP3 test as successful as long as a TCP connection is
established to the target server and the server progresses to the authentication stage of
the POP3 protocol.

SMTP Test Results

•
SMTP tests initiated from the Controller may incorrectly report successful test completion
when the SMTP server generates relay errors. The TePM Controller classifies a SMTP
test as successful as long as a TCP connection is established to the target server and it
is able to exchange SMTP command primitives with the server.
•
SMTP tests initiated from the Controller may incorrectly report successful test completion
when incorrect authentication credentials (username or password) are supplied. The
TePM Controller classifies a SMTP test as successful as long as a TCP connection is
established to the target server and it is able to exchange SMTP command primitives
with the server.

Linux Operating Systems

Licensing

•
The TePM Controller MUST be executed with root permissions on Linux in order for the
licensing to work properly.
Outstanding Issues
- 3 -