Ike Peer-Identity Ip Address - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

Software for e series broadband services routers command reference a to m
Hide thumbs Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
Table of Contents

Advertisement

JunosE 11.2.x Command Reference Guide A to M

ike peer-identity ip address

Syntax
Release Information
Description
Options
Mode
700
ike peer-identity ip address ipAddress [ ipMask ]
no ike peer-identity ip address ip address
Command introduced in JunosE Release 7.3.0.
Enables this profile to accept logins from users that present an IP address as an IKE
identity type and the IP address resides within the specified network. The no version
removes the peer IKE identity.
ipAddress—IP address in 32-bit dotted decimal format (for example, 192.56.32.2)
ipMask—Mask for associated IP subnet in dotted decimal or prefix length notation
IPSec Tunnel Profile Configuration
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.2

Table of Contents