Configuring Access Settings; Configuring Firewall Access - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1 Administration Manual

36 S U STRM L
ETTING P
Step 3
Configuring
Access Settings
Configuring Firewall
Access
Step 1
Step 2
Step 3
Step 4
Step 5
M
OG ANAGEMENT
In the View Agent column, click View Agent for the SNMP agent you wish to
access.
The SNMP Agent appears.
The System Configuration tab provides access the web-based system
administration interface, which allows you to configure firewall rules, interface
roles, passwords, and system time. This section includes:
• Firewall access. See
Update your host set-up. See
•
Configure the interface roles for a host. See
•
Change password to a host. See
•
Update the system time. See
•
You can configure local firewall access to enable communications between
devices and STRM Log Management. Also, you can define access to the
web-based system administration interface.
To enable STRM Log Management managed hosts to access specific devices or
interfaces:
In the Administration Console, click the System Configuration tab.
The System Configuration panel appears.
Click the System Management icon.
The System Management window appears.
For the host you wish to configure firewall access, click Manage System.
Log-in to the System Administration interface. The default is:
Username: root
Password: <your root password>
Note: The username and password are case sensitive.
From the menu, select Managed Host Config > Local Firewall.
The Local Firewall window appears.
STRM Log Management Administration Guide
Configuring Firewall Access.
Updating Your Host
Changing Passwords.
Updating System
Set-up.
Configuring Interface Roles.
Time.