interface serial
Syntax
Release Information
Description
Options
Mode
Related Topics
Copyright © 2010, Juniper Networks, Inc.
[ no ] interface serial interfaceSpecifier
Command introduced before JunosE Release 7.1.0.
Specifies the location of the serial interface on CT3 and COCX-F3 modules. The no version
disables the interface.
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Global Configuration
Configuring Frame Relay Layer 2 Services and Configuring HDLC Layer 2 Services in the
JunosE BGP and MPLS Configuration Guide
Chapter 10: I Commands
725