Idle-Character - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

idle-character

Syntax
Release Information
Description
Options
Mode
692
idle-character { flags | marks }
no idle-character
Command introduced before JunosE Release 7.1.0.
Configures the HDLC idle character that is transmitted between HDLC packets. The no
version restores the default value.
flags—Sets the idle character to 0x7E; the default value
marks—Sets the idle character to 0xFF
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.