Hdlc - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04 Reference Manual

JunosE 11.3.x System Event Logging Reference Guide
Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
Filter

hdlc

Description
Emergency
Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
Filter
84
None
None
Accessing redundancy mode not supported on the standby SRP; changing redundancy
mode not supported on the standby SRP; high availability disabled due to state error;
error encountered during the transition from one high availability state to another when
stateful line module switchover is performed
High availability for SRP and line modules disabled due to incompatible release on
standby; high availability for SRP and line modules disabled due to user initiated disable
High availability for SRP and line modules disabled due to standby down; high availability
is now active
None
None
None
HDLC layer
None
None
None
Interface creation failures (interface is not created); interface configuration errors;
interface pool failures
Interface creation failures during initialization; interface deletion failures (interface is still
deleted); interface pool failures (might not cause problems)
Interface pool changes
Layer initialization messages; interface creation; interface modification; interface deletion
Detailed layer initialization; interface creation details; interface deletion details
None
Copyright © 2010, Juniper Networks, Inc.