Hdlc Down-When-Looped - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

hdlc down-when-looped

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] hdlc down-when-looped
Command introduced before JunosE Release 7.1.0.
Enables loopback detection on a Cisco HDLC interface. Loopback detection is disabled
by default. The no version disables loopback detection.
Interface Configuration, Subinterface Configuration
Chapter 9: H Commands
677