Analog Devices SHARC ADSP-214 Series Hardware Reference Manual page 1011

SRCy_ENABLE
SRCy Enable
SRCy_LENOUT (29–28)
SRCy Output Word Length
SRCy_SMODEOUT (27–26)
SRCy Serial Output Format
SRCy_DITHER
SRCy Dither Enable
SRCy_SOFTMUTE
SRCy Soft Mute Enable
15 14 13 12
SRCx_RESET
SRCx Reset
SRCx_LENOUT (13–12)
SRCx Output Word Length
SRCx_SMODEOUT (11–10)
SRCx Serial Output Format
SRCx_DITHER
SRCx Dither Enable
SRCx_SOFTMUTE
SRC0 Soft Mute Enable
Figure A-98. SRCCTLx Register
Table A-96. SRCCTLx Register Bit Descriptions (RW)
Bit Name
0 SRCx_HARD_MUTE
1 SRCx_AUTO_MUTE
ADSP-214xx SHARC Processor Hardware Reference
www.BDTIC.com/ADI
31 30 29 28 27 26 25 24
11 10 9 8
Description
Hard Mute. Hard mutes SRC 0, 2.
1 = Mute (default)
Auto Hard Mute. Auto hard mutes SRC 0, 2 when non audio is
asserted by the SPDIF receiver.
0 = No mute
1 = Mute (default)
Registers Reference
23 22 21 20 19 18 17 16
7 6 5 4 3 2 1 0
SRCy_HARD_MUTE
SRCy Hard Mute Enable
SRCy_AUTO_MUTE
SRCy Auto Hard Mute
Enable (from SPDIF RX)
SRCy_SMODEIN (20–18)
SRCy Serial Input Format
SRCy_BYPASS
SRCy Bypass Mode
SRCy_DEEMPHASIS (23–22)
SRCy De-emphasis Filter
SRCx_HARD_MUTE
SRCx Hard Mute Enable
SRCx_AUTO_MUTE
SRCx Auto Hard Mute
Enable (from SPDIF RX)
SRCx_SMODEIN (4–2)
SRCx Serial Input Format
SRCx_BYPASS
SRCx Bypass Mode
SRCx_DEEMPHASIS (20–18)
SRCx De-emphasis Filter
A-185