Table of Contents
Advertisement
Command Reference Guide
connect-order
Use the connect-order command to specify the starting point in the connection sequence for each
sequence activation. The connection sequence is a circular list. Use the no form of this command to restore
the default value. Variations of this command include:
connect-order last-successful
connect-order round-robin
connect-order sequential
Syntax Description
last-successful
round-robin
sequential
Default Values
By default, connect sequences are processed sequentially.
Command History
Release 11.1
Usage Examples
The following example configures the connection sequence to begin with the last successful entry:
(config)#interface demand 1
(config-demand 1)#connect-order last-successful
60000CRG0-35E
Specifies the connect sequence be processed beginning with the last
successful entry or the first entry if there are no previous connections.
Specifies the connect sequence be processed beginning with the entry that
follows the last successful entry or the first entry if there are no previous
connections.
Specifies the connect sequence be processed from the beginning of the list.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Demand Interface Command Set
2094
Advertisement
Table of Contents
