ADTRAN AOS Version R10.1.0 Command Reference Manual page 2093

Command Reference Guide
connect-mode
Use the connect-mode command to configure the interface to only answer calls, only originate calls, or to
both answer and originate calls. Use the no form of this command to restore the default value. Variations
of this command include:
connect-mode answer
connect-mode either
connect-mode originate
Syntax Description
answer
either
originate
Default Values
By default, the connect mode is set to both answer and originate calls.
Command History
Release 11.1
Usage Examples
The following example configures demand interface 1 to only answer calls:
(config)#interface demand 1
(config-demand 1)#connect-mode answer
60000CRG0-35E
Specifies the interface may be used to answer calls, but not originate calls.
Specifies the interface may be used to answer and originate calls.
Specifies the interface may be used to originate calls, but not answer calls.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Demand Interface Command Set
2093