ADTRAN AOS Version R10.1.0 Command Reference Manual page 2095

Command Reference Guide
connect-sequence
Use the connect-sequence command to provide instructions to the interface on how to use the resource
pool and telephone numbers to connect to demand destinations. Use the no form of this command to
restore the default value.Variations of this command include the following:
connect-sequence <value> dial-string <string> forced-analog
connect-sequence <value> dial-string <string> forced-analog busyout-threshold <value>
connect-sequence <value> dial-string <string> forced-cellular
connect-sequence <value> dial-string <string> forced-cellular busyout-threshold <value>
connect-sequence <value> dial-string <string> forced-isdn-56k
connect-sequence <value> dial-string <string> forced-isdn-56k busyout-threshold <value>
connect-sequence <value> dial-string <string> forced-isdn-64k
connect-sequence <value> dial-string <string> forced-isdn-64k busyout-threshold <value>
connect-sequence <value> dial-string <string> isdn-56k
connect-sequence <value> dial-string <string> isdn-56k busyout-threshold <value>
connect-sequence <value> dial-string <string> isdn-64k
connect-sequence <value> dial-string <string> isdn-64k busyout-threshold <value>
Syntax Description
<value>
dial-string <string>
forced-analog
forced-cellular
forced-isdn-56k
forced-isdn-64k
isdn-56k
isdn-64k
busyout-threshold <value> Optional. Specifies the maximum number of connect sequence cycles
Default Values
By default, any dial resource may be used.
By default, the dial string for cellular connections is #777.
Command History
Release 11.1
Release 17.2
60000CRG0-35E
Specifies the sequence number for this connection specification entry.
Range is 1 to 65535.
Specifies the telephone number to dial when using this connection. The dial
string is limited to 20 digits.
Specifies that only analog resources may be used.
Specifies that only cellular resources may be used.
Specifies that only integrated services digital network (ISDN) resources may
be used. Call is placed using ISDN 56k.
Specifies that only ISDN resources may be used. Call is placed using ISDN
64k.
Specifies any dial resource may be used if ISDN 56k call type is used.
Specifies any dial resource may be used if ISDN 64k call type is used.
during an activation attempt that must fail before it is skipped until the next
activation attempt.
Command was introduced.
Command was expanded to include the cellular connections.
Copyright © 2012 ADTRAN, Inc.
Demand Interface Command Set
2095