Ip Dhcp-External Recreate-Subscriber-Interface - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip dhcp-external recreate-subscriber-interface

Syntax
Release Information
Description
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
[ no ] ip dhcp-external recreate-subscriber-interface
Command introduced in JunosE Release 9.2.0.
Configures the DHCP external server application to delete and re-create the existing
dynamic subscriber interface after a bound DHCP client extends its IP address lease by
restarting the DHCP discovery process on its primary IP interface instead of by initiating
the DHCP renewal process on its dynamic subscriber interface. This command is specific
to a virtual router. The no version restores the default behavior, which preserves the
dynamic subscriber interface after a bound client restarts the discovery process on its
primary IP interface.
Global Configuration
Preservation of Dynamic Subscriber Interfaces with DHCP External Server Overview
Configuring DHCP External Server to Control Preservation of Dynamic Subscriber
Interfaces
Chapter 10: I Commands
759