Vrrp Configuration Without The Real Address Owner; Figure 5: Commonly Used Vrrp Configuration - Juniper SERVICE AVAILABILITY - CONFIGURATION GUIDE V 11.1.X Configuration Manual

Chapter 5: Configuring VRRP

Figure 5: Commonly Used VRRP Configuration

VRRP Configuration Without the Real Address Owner

Figure 6 on page 110 is noticeably similar to Figure 5 on page 109 except that the
addresses configured by the VRIDs have no real owner. Consequently, both routers
R1 and R2 are configured as backup routers for VRID 1, VRID 2, VRID 3, and VRID
4.
109
How VRRP Works