Ip Vrrp Track - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
ip vrrp track
Syntax
Release Information
Description
Options
Mode
982
ip vrrp vrid track objectName [ decrement priorityValue ]
no ip vrrp vrid track objectName
Command introduced in JunosE Release 7.2.0.
Tracks a specified object and changes the priority of that object when the state of the
object changes from an up state to a down state. The priority is decremented by the
specified value or by the default value (100; when no decrement value is specified). The
object priority is restored when the state of the object changes from a down state to an
up state. The no version disables any tracking for the object.
vrid—VRID identifier; a number in the range 1–255
objectName—Name of the object to track
priorityValue—Priority value of the VRRP router; a number in the range 1–255; default
value is 100
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
