Ip Dhcp-Local Excluded-Address - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
ip dhcp-local excluded-address
Syntax
Release Information
Description
Options
Mode
768
[ no ] ip dhcp-local excluded-address ipAddressStart ipAddressStop
Command introduced before JunosE Release 7.1.0.
Specifies IP addresses that the DHCP local server should not supply from the default
address pool because those addresses are already used by devices on the subnet. The
no version allows the DHCP local server to supply the specified IP address.
ipAddressStart—Single IP address or start of the range of IP addresses that the DHCP
local server should not supply
ipAddressStop—End of the range of IP addresses that the DHCP local server should
not supply
Global Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
