Hdlc Keepalive - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

hdlc keepalive

Syntax
Release Information
Description
Options
Mode
678
hdlc keepalive [ seconds ]
no hdlc keepalive
Command introduced before JunosE Release 7.1.0.
Specifies a keepalive value. The keepalive mechanism tracks the health of the connection.
The no version turns off the keepalive feature.
seconds—Keepalive timeout period in the range 0–6553 seconds; default value is 10.
A value of zero (0) turns off the keepalive feature.
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.