Interface Lag - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

interface lag

Syntax
Release Information
Description
Options
Mode
Related Topics
Copyright © 2010, Juniper Networks, Inc.
[ no ] interface lag interfaceSpecifier
Command introduced before JunosE Release 7.1.0.
Creates an IEEE 802.3ad link aggregation group (LAG) interface, also known as a LAG
bundle, or a subinterface in a LAG bundle. Link aggregation enables you to group multiple
Ethernet physical interfaces configured on the same module and with the same
characteristics into a single logical interface. The individual Ethernet interfaces are referred
to as member links of the LAG bundle. The no version removes the LAG bundle or
subinterface.
interfaceSpecifier—LAG interface specifier; see Interface Types and Specifiers on
page 5
Global Configuration
Configuring the Scheduler Hierarchy for Hashed Load Balancing in 802.3ad Link
Aggregation Groups
Configuring the Scheduler Hierarchy for Subscriber Load Balancing in 802.3ad Link
Aggregation Groups
Configuring Load Rebalancing for 802.3ad Link Aggregation Groups
Chapter 10: I Commands
719