Multicast Boundary - H3C MSR 20-20 Command Reference Manual

Msr 20/30/50 series routers
Hide thumbs Also See for MSR 20-20:
Table of Contents

Advertisement

multicast boundary

Syntax
View
Parameter
Description
-2 4.4.4.7
Incoming interface address: 6.6.6.7
Previous-hop router address: 0.0.0.0
Input packet count on incoming interface: 2
Output packet count on outgoing interface: 259
Total number of packets for this source-group pair: 8100
Protocol: PIM
Forwarding TTL: 0
Forwarding code: No error
Table 327 Description on the fields of the mtracert command
Field
last-hop router
(6.6.6.6, 225.2.1.1)
-1 5.5.5.8
Incoming interface address
Previous-hop router address
Input packet count on
incoming interface
Output packet count on
outgoing interface
Total number of packets for
this source-group pair
Protocol
Forwarding TTL
Forwarding code
multicast boundary group-address { mask | mask-length }
undo multicast boundary { group-address { mask | mask-length } | all }
Interface view
group-address: Multicast group address, in the range of 224.0.0.0 to
239.255.255.255.
mask: Mask of the multicast group address.
mask-length: Mask length of the multicast group address, in the range of 4 to 32.
all: Specifies to remove all forwarding boundaries configured on the interface.
Use the
multicast boundary
boundary.
Description
Last-hop router
The (S, G) multicast stream for which the forwarding path is
being traced
The (S, G) outgoing interface address of each hop, starting
from the last-hop router
The address of the interface on which the (S, G) packets arrive
The IP address of the router from which this router receives
packets from this source
The total number of multicast packets received on the
incoming interface
The total number of multicast packets transmitted for
transmission on the outgoing interface
The total number of packets from the specified source
forwarded by this router to the specified group
The multicast routing protocol in use between this router and
the previous hop router
The minimum TTL that a packet is required to have before it
can be forwarded over the outgoing interface
Forwarding code
command to configure a multicast forwarding
1337

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msr 20-21Msr 30-16Msr 30-20Msr 30-40Msr 30-60Msr 50 ... Show all

Table of Contents