Hello-Option Neighbor-Tracking (Ipv6 Pim View); Hello-Option Lan-Delay (Ipv6 Pim View) - H3C MSR 20-20 Command Reference Manual

1480 C 93: IP 6 PIM C
HAPTER V
Related command:
Example

hello-option lan-delay (IPv6 PIM view)

Syntax
View
Parameter
Description
Related command:
Example

hello-option neighbor-tracking (IPv6 PIM view)

Syntax
View
Parameter
C
ONFIGURATION OMMANDS
By default, the IPv6 PIM neighbor timeout time is 105 seconds.
pim ipv6 hello-option holdtime.
# Set the IPv6 PIM neighbor timeout time to 120 seconds globally.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] hello-option holdtime 120
hello-option lan-delay interval
undo hello-option lan-delay
IPv6 PIM view
interval: Prune delay in milliseconds, with an effective range of 1 to 32,767.
Use the
hello-option lan-delay
prune delay time, namely the length of time the device must wait upon receiving a
prune message from downstream before taking the prune action. Within this
period of time, if the device receives a prune override message from that
downstream device, the prune action will be cancelled.
Use the undo hello-option lan-delay
By default, the prune delay to 500 milliseconds.
hello-option override-interval (IPv6 PIM view), pim ipv6 hello-option
override-interval and pim ipv6 hello-option lan-delay.
# Set the prune delay to 200 milliseconds globally.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] hello-option lan-delay 200
hello-option neighbor-tracking
undo hello-option neighbor-tracking
IPv6 PIM view
None
command to configure the global value of
command to restore the default setting.