Display Ospf Cumulative - H3C MSR 20-20 Command Reference Manual

display ospf cumulative

Syntax
View
Parameters
Description
Examples
Table 264 Description on the fields of the display ospf brief command
Field
Area
Authtype
Area flag
SPF scheduled Count
Interface
Cost
State
Type
MTU
Priority
Designated Router
Backup Designated Router
Timers
Transmit Delay
display ospf [ process-id ] cumulative
Any view
process-id: OSPF process ID, in the range 1 to 65535.
Use the
display ospf cumulative
Use of this command is helpful for troubleshooting.
# Display OSPF statistics.
<Sysname> display ospf cumulative
OSPF Process 1 with Router ID 2.2.2.2
Cumulations
IO Statistics
Type
Hello
DB Description
Link-State Req
Link-State Update
Link-State Ack
LSAs originated by this router
Router: 4
Network: 0
Sum-Net: 0
Description
Area ID in the IP address format
Authentication type of the area: Non-authentication,
simple authentication, or MD5 authentication
The type of the area
SPF calculation count in the OSPF area
IP address of the interface
Interface cost
Interface state
Interface network type
Interface MTU
Router priority
The Designated Router
The Backup Designated Router
Intervals of timers: hello, dead, poll, retransmit, and
transmit delay
LSA transmit delay on the interface
command to display OSPF statistics.
Input Output
61 122
2 3
1 1
3 3
3 2
1117