H3C MSR 20-20 Command Reference Manual page 1595

incoming-interface: Displays all tunnels that use the interface identified by the
interface-type interface-number arguments as the incoming interface.
outgoing-interface: Displays all tunnels that use the interface identified by the
interface-type interface-number arguments as the outgoing interface.
interface: Displays all tunnels that use the interface identified by the
interface-type interface-number arguments as the incoming or outgoing interface.
interface-type interface-number: Specifies an interface by its type and number.
verbose: Displays detailed information.
Description Use the
TE tunnels.
Example # Display information about MPLS TE tunnels. (The output may vary by signaling
protocol.)
<Sysname> display mpls te tunnel
LSP-Id
1.1.1.9:1024
1.1.1.9:2048
Table 413 Description on the fields of the display mpls te tunnel command
Field
LSP-ID
Destination
In/Out-IF
Name
# Display detailed information about MPLS TE tunnels.
<Sysname> display mpls te tunnel verbose
No
LSP-Id
Tunnel-Name
Destination
In-Interface
Out-Interface
Tunnel BW
Class Type
Ingress LSR-Id : 1.1.1.9
Egress LSR-Id
Setup-Priority : 7
Hold-Priority
Sign-Protocol
Resv Style
IncludeAnyAff
ExcludeAllAff
IncludeAllAff
Created Time
display mpls te tunnel
Destination
3.3.3.9
3.3.3.9
Description
LSP ID of tunnel
Destination router ID
Incoming/outgoing interface
Tunnel name configured on the ingress node
: 1
: 1.1.1.9:1024
: Tunnel0
: 3.3.3.9
: -
: Eth1/0
: 0 kbps
: bc0
: 3.3.3.9
: 7
: RSVP TE
: SE
: 0x0
: 0x0
: 0x0
: 2004/10/18 16:05:17
command to display information about MPLS
In/Out-If
-/Eth1/0
-/Eth1/1
1595
Name
Tunnel0
Tunnel0