Ipv6 Nd Dad Attempts; Ipv6 Nd Hop-Limit - H3C MSR 20-20 Command Reference Manual

Description
Example

ipv6 nd dad attempts

Syntax
View
Parameter
Description
Example

ipv6 nd hop-limit

Syntax
View
Use the
ipv6 nd autoconfig other-flag
configuration flag (O) flag to 1 so that the host can acquire information other than
IPv6 address through stateful autoconfiguration (for example, DHCP server).
Use the
undo ipv6 nd autoconfig other-flag
so that the host can acquire other information through stateless
autoconfiguration.
By default, the O flag is set to 0.
# Configure the host to acquire information other than IPv6 address through
stateless autoconfiguration.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] undo ipv6 nd autoconfig other-flag
ipv6 nd dad attempts value
undo ipv6 nd dad attempts
Interface view
value: Number of attempts to send an NS message for DAD, in the range of 0 to
600. The default value is "1". When it is set to 0, the DAD is disabled.
Use the
ipv6 nd dad attempts
to send an NS message for DAD.
Use the
undo ipv6 nd dad attempts
By default, the number of attempts to send an NS message for DAD is 1.
# Set the number of attempts to send an NS message for DAD to 20.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ipv6 nd dad attempts 20
ipv6 nd hop-limit value
undo ipv6 nd hop-limit
System view
command to set the other stateful
command to remove the setting
command to configure the number of attempts
command to restore the default.
851