Probe-Interval (Ipv6 Pim View); Register-Policy (Ipv6 Pim View) - H3C MSR 20-20 Command Reference Manual

Parameter
Description
Example

probe-interval (IPv6 PIM view)

Syntax
View
Parameter
Description
Related command:
Example

register-policy (IPv6 PIM view)

Syntax
View
interval: Maximum delay in seconds between hello messages, with an effective
range of 1 to 5.
Use the
pim ipv6 triggered-hello-delay
delay between hello messages.
Use the
undo pim ipv6 triggered-hello-delay
default setting.
By default, the maximum delay between hello messages is 5 seconds.
# Set the maximum delay between hello messages to 3 seconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim ipv6 trigged-hello-delay 3
probe-interval interval
undo probe-interval
IPv6 PIM view
interval: Register probe time in seconds, with an effective range of 1 to 3,600.
Use the
probe-interval
Use the undo probe-interval
By default, the register probe time is 5 seconds.
register-suppression-timeout (IPv6 PIM view).
# Set the probe time to 6 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] probe-interval 6
register-policy acl6-number
undo register-policy
IPv6 PIM view
command to configure the maximum
command to configure the register probe time.
command to restore the default setting.
command to restore the
1493