1360
C
88: IGMP C
HAPTER
Description
Related command:
Example
robust-count (IGMP view)
Syntax
View
Parameter
Description
C
ONFIGURATION
OMMANDS
a multicast source address, this argument has an effective value range of 0 to 32.
The system default is 32 in both cases.
Use the
reset igmp group
Note that:
When clearing the IGMP forwarding entries of a VLAN interface, this command
■
also clears the IGMP Snooping forwarding entries for that VLAN.
This command cannot clear IGMP forwarding entries of static joins.
■
display igmp group.
# Clear all the IGMP forwarding entries on all interfaces in the public instance.
<Sysname> reset igmp group all
# Clear all the IGMP forwarding entries on Ethernet 1/0 in the public instance.
<Sysname> reset igmp group interface ethernet 1/0 all
# Clear the IGMP forwarding entries for multicast group 225.0.0.1 on Ethernet 1/0
in the public instance.
<Sysname> reset igmp group interface ethernet 1/0 225.0.0.1
# Clear the IGMP forwarding entries for multicast groups in the 225.1.1.0/24
segment on Ethernet 1/0 in the public instance.
<Sysname> reset igmp group interface ethernet 1/0 225.1.1.0 mask 24
robust-count robust-value
undo robust-count
Public instance IGMP view, VPN instance IGMP view
robust-value: IGMP querier robustness variable, with an effective range of 2 to 5.
The IGMP robustness variable determines the number of general queries the IGMP
querier sends on startup and the number of IGMP group-specific queries the IGMP
querier sends upon receiving an IGMP leave message.
Use the
robust-count
variable globally.
Use the
undo robust-count
By default, the IGMP querier robustness variable is 2.
command to clear IGMP forwarding entries.
command to configure the IGMP querier robustness
command to restore the system default.