H3C MSR 20-20 Command Reference Manual page 1163

Parameters process-id: RIP process number, in the range of 1 to 65535.
vpn-instance vpn-instance-name: Specifies a VPN instance name, a string of 1 to
31 characters.
Description Use the
information of the specified RIP process.
If process-id is not specified, information about all configured RIP processes is
■
displayed.
If vpn-instance-name is specified, the RIP configuration of the specified VPN
■
instance is displayed.
Examples # Display the current status and configuration information of all configured RIP
processes.
<Sysname> display rip
Public VPN-instance name :
RIP process : 1
Table 278 Description on the fields of the display rip command
Field
Public VPN-instance name (or
Private VPN-instance name)
RIP process
RIP version
Preference
Checkzero
Default-cost
Summary
Hostroutes
Maximum number of balanced
paths
Update time
command to display the current status and configuration
display rip
RIP version : 1
Preference : 100
Checkzero : Enabled
Default-cost : 0
Summary : Enabled
Hostroutes : Enabled
Maximum number of balanced paths : 8
Update time : 30 sec(s)
Suppress time : 120 sec(s)
TRIP retransmit time :
TRIP response packets retransmit count :
Silent interfaces : None
Default routes : Disabled
Verify-source : Enabled
Networks :
192.168.1.0
Configured peers : None
Triggered updates sent : 0
Number of routes changes : 0
Number of replies to queries : 0
Timeout time
Garbage-collect time :
5 sec(s)
36
Description
The RIP process runs under a public VPN instance/The RIP
process runs under a private VPN instance
RIP process number
RIP version 1 or 2
RIP route priority
Indicates whether the zero field check is enabled for RIP-1
messages.
Default cost of the redistributed routes
Indicates whether the routing summarization is enabled
Indicates whether to receive host routes
Maximum number of load balanced routes
RIP update interval
1163
: 180 sec(s)
120 sec(s)