Display Mpls Route-State - H3C MSR 20-20 Command Reference Manual

1532 C 95: MPLS B
HAPTER
View
Parameters
Description
Examples

display mpls route-state

Syntax
View
Parameter
C C
ASICS ONFIGURATION OMMANDS
Any view
token: NHLFE entry index. The value range varies by device.
include text: Specifies NHLFE entries including a specified string.
Use the
display mpls nhlfe
table.
With the token argument not specified, the command displays information about
all NHLFE entries.
# Display information about a specified NHLFE entry.
<Sysname> display mpls nhlfe 2
Out-Interface
----------------------------------------------------------------------
S2/0
1 Record(s) Found
# Display all NHLFE entries.
<Sysname> display mpls nhlfe
Out-Interface
----------------------------------------------------------------------
S2/0
1 Record(s) Found
Table 382 Description on the fields of the display mpls nhlfe command
Field
Out-Interface
Token
Oper
Nexthop
Deep
Stack
display mpls route-state [ vpn-instance vpn-instance-name ] [ dest-addr
mask-length ]
Any view
vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31
characters.
dest-addr: Destination IP address.
mask-length: Length of the mask for the destination IP address, in the range 0 to
32.
command to display information about the NHLFE
Token Oper Nexthop
2 PUSH 88.1.1.2
Token Oper Nexthop
2 PUSH 88.1.1.2
Deep Stack
1 1024
Deep Stack
1 1024
Description
Outgoing interface
NHLFE entry index
Operation type
Next hop
Depth of the MPLS label stack
MPLS label