Ipv6 Maximum Load-Balancing; Ipv6 Preference - H3C MSR 20-20 Command Reference Manual

1276 C 83: IP 6 IS-IS C
HAPTER V
Description
Examples

ipv6 maximum load-balancing

Syntax
View
Parameters
Description
Examples

ipv6 preference

Syntax
View
Parameters
C
ONFIGURATION OMMANDS
Use the ipv6 import-route isisv6 level-2 into level-1
route leaking from Level-2 to Level-1.
Use the
undo ipv6 import-route isisv6 level-2 into level-1
disable the leaking.
The leaking is disabled by default.
The route leaking feature enables a Level-1-2 router to advertise routes destined to
the Level-2 area and other Level-1 areas to the Level-1 and Level-1-2 routers in the
local area.
# Enable IPv6 IS-IS route leaking from Level-2 to Level-1.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] ipv6 import-route isisv6 level-2 into level-1
ipv6 maximum load-balancing number
undo ipv6 maximum load-balancing
IS-IS view
number: Maximum number of equivalent load-balanced routes.
Use the ipv6 maximum load
number of equivalent load-balanced routes. Use the undo ipv6 maximum
load-balancing command to restore the default.
n
Configure the maximum number of equivalent load-balanced routes according to
the memory capacity.
# Configure the maximum number of equivalent load-balanced routing as 2.
<Sysname> system-view
[Sysname] isis 100
[Sysname-isis-100] ipv6 maximum load-balancing 2
ipv6 preference { route-policy route-policy-name | preference } *
undo ipv6 preference
IS-IS view
preference: Preference for IPv6 IS-IS, ranging from 1 to 255.
-balancing command to configure the maximum
to enable IPv6 IS-IS
command to