Domain-Authentication-Mode - H3C MSR 20-20 Command Reference Manual

1054 C 74: IS-IS C
HAPTER

domain-authentication-mode

Syntax
View
Parameters
C
ONFIGURATION OMMANDS
Table 242 Description on the fields of the display isis statistics command
Field
Statistics information for ISIS(processid) Statistics for the ISIS process
Level-1 Statistics
Level-2 Statistics
Learnt routes information
Imported routes
information
Lsp information
domain-authentication-mode { simple | md5 } password [ ip | osi ]
undo domain-authentication-mode
IS-IS view
simple: Specifies to send the password in plain text.
md5: Specifies to send the password encrypted with MD5.
password: Specifies a password. For simple authentication mode, the password
must be plain text. For md5 authentication mode, the password can be either
plain text or cipher text. A plain text password is a string of up to 16 characters,
such as user918. A cipher password must be a string of 24 characters, such as
_(TT8F]Y5SQ=^Q'MAF4<1!!.
ip: Specifies to check the IP related fields in a LSP.
LSP Source ID:
0000.0000.0002
Description
Level-1 Statistics
Level-2 Statistics
Number of learnt IPv4 routes
Number of learnt IPv6 routes
IPv4 Imported Redistributed IPv4 routes
Routes
Static
■
Direct
■
ISIS
■
BGP
■
RIP
■
OSPF
■
IPv6 Imported Redistributed IPv6 routes
Routes
Static
■
Direct
■
ISISv6
■
BGP4+
■
RIPng
■
OSPFv3
■
LSP information
LSP Source ID: ID of the source system
■
No. of used LSPs: number of used LSPs
■
No. of used LSPs
001