Pim Holdtime Assert; Pim Holdtime Join-Prune - H3C MSR 20-20 Command Reference Manual

Related command:
Example

pim holdtime assert

Syntax
View
Parameter
Description
Related command:
Example

pim holdtime join-prune

Syntax
View
Parameter
Description
pim hello-option lan-delay, hello-option lan-delay (PIM view), and
hello-option override-interval (PIM view).
# Set the prune override interval to 2,000 milliseconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim hello-option override-interval 2000
pim holdtime assert interval
undo pim holdtime assert
Interface view
interval: Assert timeout time in seconds, with an effective range of 7 to
2,147,483,647.
Use the
pim holdtime assert
the current interface.
Use the undo pim holdtime assert
By default, the assert timeout time is 180 seconds.
holdtime join-prune (PIM view), pim holdtime join-prune, and holdtime
assert (PIM view).
# Set the assert timeout time to 100 seconds on Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim holdtime assert 100
pim holdtime join-prune interval
undo pim holdtime join-prune
Interface view
interval: Join/prune timeout time in seconds, with an effective range of 1 to
65,535.
Use the pim holdtime join-prune
timeout time on the interface.
command to configure the assert timeout time on
command to restore the default setting.
command to configure the join/prune
1415