Peer Ebgp-Max-Hop (Ipv6 Address Family View) - H3C MSR 20-20 Command Reference Manual

1248 C 82: IP 6 BGP C
HAPTER V
Description
Examples

peer ebgp-max-hop (IPv6 address family view)

Syntax
View
Parameters
Description
Examples
C
ONFIGURATION OMMANDS
ipv6-address: IPv6 address of a peer.
description-text: Description information for the peer/peer group, a string of 1 to
79 characters.
Use the
peer description
a peer/peer group.
Use the undo peer description
information of a peer/peer group.
By default, no description information is configured for a peer (group).
You need create a peer/peer group before configuring a description for it.
# Configure the description for the peer group test as ISP1.
<Sysname] system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] group test external
[Sysname-bgp-af-ipv6] peer test description ISP1
peer { ipv6-group-name | ipv6-address } ebgp-max-hop [ hop-count ]
undo peer { ipv6-group-name | ipv6-address } ebgp-max-hop
IPv6 address family view
ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of a peer.
hop-count: Maximum hop count, in the range 1 to 255. By default, the value is
64.
Use the peer ebgp-max-hop
connection to a peer/peer group indirectly connected.
Use the
undo peer ebgp-max-hop
By default, this feature is disabled.
You can use the argument hop-count to specify the maximum router hops of the
EBGP connection.
# Allow establishing the EBGP connection with the peer group test on an
indirectly connected network.
command to configure the description information for
command to remove the description
command to allow establishing the EBGP
command to remove the configuration.