Display Mpls Rsvp-Te Request - H3C MSR 20-20 Command Reference Manual

display mpls rsvp-te request

Syntax
View
Parameter
Description
Example
Table 398 Description on the fields of display mpls rsvp-te psb content
Field
Path message
Resource
Graceful Restart State
display mpls rsvp-te request [ interface interface-type interface-number ] [ | { begin |
include | exclude } regular-expression ]
Any view
interface interface-type interface-number: Specifies an interface by its type and
number.
|: Filters output by regular expression.
begin: Displays information beginning with a defined regular expression.
include: Displays information that includes a defined regular expression.
exclude: Displays information that excludes a defined regular expression.
regular-expression: Regular expression, a string of 1 to 80 characters without
spaces.
Use the
display mpls rsvp-te request
RSVP-TE requests on the specified or all interfaces.
# Display information about RSVP-TE requests on all interfaces.
<Sysname> display mpls rsvp-te request
Interface Ethernet1/0:
Tunnel Dest: 2.2.2.2
Local LSP ID: 4
NextHopAddr: 80.4.1.1
SessionFlag: SE Style desired.
Token bucket rate: 0.00
Out Interface: Ethernet1/1
Table 399 Description on the fields of the display mpls rsvp-te request command
Field
Interface Ethernet1/0
Tunnel Dest
Ingress LSR ID
Local LSP ID
Session Tunnel ID
Description
Path message sent from the interface to the next hop at
X.X.X.X
Available when the RSVP flag is configured
State of GR: stale or normal. Displayed as --- when not
supported by the device.
command to display information about
Ingress LSR ID: 3.3.3.3
Session Tunnel ID: 4
Token bucket size: 1000.00
Description
RSVP-TE enabled Ethernet interface
Tunnel destination, in the format of X.X.X.X
Ingress LSR ID, in the format of X.X.X.X
Local LSP ID
Session tunnel ID
1579