Terminal; Auto-Close; Auto-Link - H3C MSR 20-20 Command Reference Manual

70

auto-close

Syntax
View
Parameters
Description
Example

auto-link

Syntax
View
Parameters
Description
T
ERMINAL
C
OMMANDS
auto-close time
undo auto-close
Terminal template view
time: Automatic link teardown time, in seconds. It ranges from 5 to 240.
Use the command to configure the automatic link teardown time.
auto-close
Use the
undo auto-close
automatic link teardown time is 0 seconds, namely, no automatic link teardown is
performed.
The terminal access feature supports the automatic link teardown function. You
can enable the function and configure the teardown time in terminal template
view. With this function enabled, if a terminal is disconnected from the router, the
terminal enters the state of DOWN, and the router will automatically tear down
the TCP connection to the front-end processor (FEP) after the specified time
period. If the function is disabled, the TCP connection will always remain.
# Set the automatic link teardown time to 10 seconds.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] auto-close 10
auto-link time
undo auto-link
Terminal template view
time: Automatic link establishment time, in seconds. It ranges from 5 to 240.
Use the command to configure the automatic link establishment time.
auto-link
A C
CCESS ONFIGURATION
command to restore the default. By default; the