Ssm-Policy (Pim View); State-Refresh-Interval (Pim View) - H3C MSR 20-20 Command Reference Manual

ssm-policy (PIM view)

Syntax
View
Parameter
Description
Example

state-refresh-interval (PIM view)

Syntax
View
Parameter
Description
Related command:
ssm-policy acl-number
undo ssm-policy
Public instance PIM view, VPN instance PIM view
acl-number: Basic ACL number, in the range of 2000 to 2999.
Use the command to configure the SSM group range.
ssm-policy
Use the undo ssm-policy
By default, the SSM group range is 232.0.0.0/8.
This command allows you to define an address range of permitted or denied
multicast sources or groups. If the match succeeds, the multicast mode will be
PIM-SSM; otherwise the multicast mode will be PIM-SM.
# Configure the SSM group range to be 232.1.0.0/16 in the public instance.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 232.1.0.0 0.0.255.255
[Sysname-acl-basic-2000] quit
[Sysname] pim
[Sysname-pim] ssm-policy 2000
state-refresh-interval interval
undo state-refresh-interval
Public instance PIM view, VPN instance PIM view
interval: State refresh interval in seconds, with an effective range of 1 to 255.
Use the
state-refresh-interval
state refresh messages.
Use the
undo state-refresh-interval
By default, the state refresh interval is 60 seconds.
pim state-refresh-capable, state-refresh-rate-limit (PIM view), and
state-refresh-ttl (PIM view).
command to restore the system default.
command to configure the interval between
command to restore the default setting.
1425