Hops-Count; Label Advertise - H3C MSR 20-20 Command Reference Manual

Msr 20/30/50 series routers
Hide thumbs Also See for MSR 20-20:
Table of Contents

Advertisement

1542
C
95: MPLS B
HAPTER
Example

hops-count

Syntax
View
Parameter
Description
Related command:
Example

label advertise

Syntax
C
C
ASICS
ONFIGURATION
OMMANDS
Modifying the LDP recovery time may cause the original sessions to be
reestablished. The LSPs based on the sessions will be removed and need to be
reestablished.
# Set the LDP recovery time to 45 seconds.
<Sysname> system-view
[Sysname] mpls ldp
[Sysname-mpls-ldp] graceful-restart timer recovery 45
hops-count hop-number
undo hops-count
MPLS LDP view/MPLS LDP VPN instance view
hop-number: Hop count, in the range 1 to 32.
Use the
hops-count
Use the
undo hops-count
By default, the maximum hop count for loop detection is 32.
Note that:
You must configure the command before enabling LDP on any interface.
The maximum hop count dictates how fast LDP detects a loop. Adjust this
argument as required.
loop-detect, path-vectors.
# Set the maximum hop count for loop detection to 25 for the public network LDP.
<Sysname> system-view
[Sysname] mpls ldp
[Sysname-mpls-ldp] hops-count 25
# Set the maximum hop count for loop detection to 25 for LDP instance named
vpn1.
<Sysname> system-view
[Sysname] mpls ldp vpn-instance vpn1
[Sysname-mpls-ldp-vpn-instance-vpn1] hops-count 25
label advertise { explicit-null | implicit-null | non-null }
command to set the maximum hop count for loop detection.
command to restore the default.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msr 20-21Msr 30-16Msr 30-20Msr 30-40Msr 30-60Msr 50 ... Show all

Table of Contents