Peer Route-Policy (Bgp-Vpnv4 Subaddress Family View); Peer Upe - H3C MSR 20-20 Command Reference Manual

1706 C 98: MPLS L3VPN C
HAPTER

peer route-policy (BGP-VPNv4 subaddress family view)

Syntax
View
Parameter
Description
Example

peer upe

Syntax
View
Parameter
Description
C
ONFIGURATION OMMANDS
peer { group-name | ip-address } route-policy route-policy-name { export | import }
undo peer { group-name | ip-address } route-policy route-policy-name { export |
import }
BGP-VPNv4 subaddress family view
group-name: Name of the peer group, a string of 1 to 47 characters.
ip-address: IP address of the peer.
route-policy-name: Name of the routing policy, a string of 1 to 19 characters.
export: Filters the routes to be advertised.
import: Filters the received routes.
Use the
peer route-policy
group.
Use the
undo peer route-policy
By default, no routing policy is applied to a peer or peer group.
# In BGP-VPNv4 subaddress family view, apply routing policy test-policy to peer
group test to filter the received routes.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] peer test route-policy test-policy import
peer { group-name | ip-address } upe
undo peer { group-name | ip-address } upe
BGP-VPNv4 subaddress family view
group-name: Name of the peer group, a string of 1 to 47 characters.
ip-address: IP address of the peer.
Use the command to configure a BGP peer or peer group as an HoVPN
peer upe
UPE for a BGP-VPNv4 subaddress family.
Use the
undo peer upe
command to apply a routing policy to a peer or peer
command to remove the application.
command to remove the configuration.