Display Ip As-Path - H3C MSR 20-20 Command Reference Manual

View
Parameters
Description
Related commands:
Examples

display ip as-path

Syntax
View
Parameters
Description
Related commands:
Examples
Routing policy view
value: Tag value, in the range 0 to 4294967295.
Use the command to set a specified tag value for RIP, OSPF or IS-IS
apply tag
routing information.
Use the undo apply tag
No routing tag is set for RIP, OSPF or IS-IS routing information by default.
if-match interface, if-match acl, if-match ip-prefix, if-match ip next-hop,
if-match cost, if-match tag, route-policy, apply ip-address next-hop, apply
local-preference, apply cost and apply origin.
# Create routing policy policy1 with node 10, matching mode as permit. If a route
matches OSPF external route type 1, set the tag of the route to 100.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match route-type external-type1
[Sysname-route-policy] apply tag 100
display ip as-path [ as-path-acl number ]
Any view
as-path-acl-number: AS path ACL number, in the range of 1 to 256.
Use the
display ip as-path
Information about all BGP AS path ACLs will be displayed if no as-path-acl-number
is specified.
ip as-path, if-match as-path and apply as-path.
# Display the information of BGP AS path ACL 1.
<Sysname> display ip as-path-acl 1
ListID Mode
1 permit
Table 283 Description on the fields of the display ip as-path-acl command
Field
ListID
Mode
Expression
command to remove the clause configuration.
command to display BGP AS path ACL information.
Expression
2
Description
AS path ACL ID
Matching mode: permit, deny
Regular expression for matching
1195