Display Ipsec Profile - H3C MSR 20-20 Command Reference Manual

101

display ipsec profile

Syntax
View
Parameter
Description
Related command:
Example
IPS P
EC ROFILE
C
OMMANDS
display ipsec profile [ name profile-name ]
Anyview
profile-name: Name of the IPSec profile, a case-insensitive string of 1 to 15
characters.
Use the
display ipsec profile
or all IPSec profiles.
Note that if the profile-name keyword is not specified, this command will display
information about all IPSec profiles.
ipsec profile (system view).
# Display information about all IPSec profiles.
<Sysname> display ipsec profile
===========================================
IPsec profile: "abc"
Using interface: {Tunnel0}
===========================================
------------------------------------
IPsec profile name: "abc"
mode: dvpn
-------------------------------------
tunnel local address: 162.105.10.1
tunnel remote address: dynamic
perfect forward secrecy: None
proposal name: prop1
ipsec sa local duration(time based): 3600 seconds
ipsec sa local duration(traffic based): 1843200 kilobytes
C
ONFIGURATION
command to display information about a specified