Pim State-Refresh-Capable; Pim Timer Graft-Retry - H3C MSR 20-20 Command Reference Manual

Related command:
Example

pim state-refresh-capable

Syntax
View
Parameter
Description
Related command:
Example

pim timer graft-retry

Syntax
View
Parameter
Use the
undo pim sm
By default, PIM-SM is disabled.
pim dm.
# Enable PIM-SM on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim sm
pim state-refresh-capable
undo pim state-refresh-capable
Interface view
None
Use the pim state-refresh-capable
on the interface.
Use the
undo pim state-refresh-capable
feature.
By default, the state refresh feature is enabled.
state-refresh-interval (PIM view), state-refresh-rate-limit (PIM view), and
state-refresh-ttl (PIM view).
# Disable state refresh on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] undo pim state-refresh-capable
pim timer graft-retry interval
undo pim timer graft-retry
Interface view
interval: Graft retry period in seconds, with an effective range of 1 to 65,535.
command to disable PIM-SM.
command to enable the state fresh feature
command to disable the state fresh
1417