Display Isis Traffic-Eng Sub-Tlvs - H3C MSR 20-20 Command Reference Manual

1572 C 96: MPLS TE C
HAPTER
Description
Example

display isis traffic-eng sub-tlvs

Syntax
View
Parameter
Description
Related command:
C
ONFIGURATION OMMANDS
vpn-instance vpn-instance-name: Specifies a VPN instance. The
vpn-instance-name argument is a string of 1 to 31 characters. For the default VPN
instance, you do not need to configure this keyword and argument combination.
Use the display isis traffic-eng statistics
about TE for IS-IS.
If no IS-IS level is specified, the statistics about TE in the IS-IS Level-1-2 area is
displayed.
# Display statistics about TE for IS-IS.
<Sysname> display isis traffic-eng statistics
TE Statistics Information
-------------------------
IS-IS System Type
IS-IS Cost Style Status
IS-IS Level-1 Traffic Engineering Status
IS-IS Level-2 Traffic Engineering Status
IS-IS Router ID
Table 392 Description on the fields of the display isis traffic-eng statistics command
Field
IS-IS System Type
IS-IS Cost Style Status
IS-IS Level-1 Traffic Engineering Status
IS-IS Level-2 Traffic Engineering Status
IS-IS Router ID
display isis traffic-eng sub-tlvs [ process-id | vpn-instance vpn-instance-name ]
Any view
process-id: IS-IS process ID, in the range 1 to 65535.
vpn-instance vpn-instance-name: Specifies a VPN instance. The
vpn-instance-name argument is a string of 1 to 31 characters. For the default VPN
instance, you do not need to configure this keyword and argument combination.
Use the
display isis traffic-eng sub-tlvs
about sub-TLVs for the IS-IS TE extension.
If no IS-IS level is specified, information about TE extension sub-TLVs in the IS-IS
Level-1-2 area is displayed.
te-set-subtlv.
command to display the statistics
TE information for ISIS(1)
--------------------------
: Level-1-2
: Wide
: Disabled
: Enabled
: 1.1.1.9
Description
System type
Cost type of the router
TE state of Level-1 router
TE state of Level-2 router
IS-IS router ID
command to display information