Peer Default-Route-Advertise; Peer Description (Ipv6 Address Family View) - H3C MSR 20-20 Command Reference Manual

peer default-route-advertise

Syntax
View
Parameters
Description
Examples

peer description (IPv6 address family view)

Syntax
View
Parameters
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 connect-interface loopback 0
peer { group-name | ipv4-address | ipv6-address } default-route-advertise
[ route-policy route-policy-name ]
undo peer { group-name | ipv4-address | ipv6-address } default-route-advertise
IPv6 address family view
group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.
ipv4-address: IPv4 address of a peer.
ipv6-address: IPv6 address of a peer.
route-policy-name: Route-policy name, a string of 1 to 19 characters.
Use the
peer default-route-advertise
a peer/peer group.
Use the
undo peer default-route-advertise
default route.
By default, no default route is advertised to a peer/peer group.
Using this command does not require the default route available in the routing
table. With this command used, the router sends the default route unconditionally
to the peer/peer group with the next hop being itself.
# Advertise a default route to peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 default-route-advertise
peer { ipv6-group-name | ipv6-address } description description-text
undo peer { ipv6-group-name | ipv6-address } description
IPv6 address family view
ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.
command to advertise a default route to
command to disable advertising a
1247