Rta Server Enable; Rta Source-Ip - H3C MSR 20-20 Command Reference Manual

Example

rta server enable

Syntax
View
Parameters
Description
Example

rta source-ip

Syntax
View
Parameters
Description
By default, no listening port is configured on the RTC server.
Note that only one listening port can be configured.
# Configure the RTC server listening port number as 9010.
<Sysname> system-view
[Sysname] rta rtc-server listen-port 9010
rta server enable
undo rta server enable
System view
None
Use the
rta server enable
Use the
undo rta server enable
By default, terminal access is disabled on the router.
Note that, after terminal access is disabled, the settings of template, terminal, and
VTY will be kept.
# Enable terminal access.
<Sysname> system-view
[Sysname] rta server enable
rta source-ip ip-address
undo rta source-ip
System view
ip-address: Source IP address used for establishing a TCP connection. It cannot be
a loopback address, such as 127.0.0.1.
Use the
rta source-ip
connections.
Use the
undo rta source-ip
configured.
command to enable terminal access on the router.
command to disable terminal access.
command to configure the global source IP address of TCP
command to cancel the source IP address
915